Tribological Characteristics of SCM 440 Bearing Steel Under Gas and Oil Lubricant in The Cylinder Block Tractor Engine

Adiyanto, Okka and Pratama, Pandu Sandi and Choi, Wonsik (2018) Tribological Characteristics of SCM 440 Bearing Steel Under Gas and Oil Lubricant in The Cylinder Block Tractor Engine. [Artikel Dosen]

[img] Text (Tribological characteristics of SCM 440 bearing steel under gas and oil lubricant in the cylinder block tractor engine)
A.1. Tribological characteristic of SCM 440.pdf - Accepted Version

Download (396kB)

Abstract

Purpose – This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and oil lubrication. Design/methodology/approach – Friction tests were performed using a pin-on-disc tester with loads of 2 to 10 N and sliding velocities of 0.06 to 0.34 m/s. The experiment was done with and without nitrogen, and paraffin oil lubricant was used to prevent wear during process. Findings – The nondimensional characteristic number from the Stribeck curves indicated that the lubrication regime is hydrodynamic. As the velocity and load increased, the friction coefficient of the SCM 440 increased and greater applied load resulted in a smaller friction coefficient. The range of the friction coefficient was 0.017001 to 0.092904 with paraffin oil lubrication and 0.01614 to 0.4555 with nitrogen lubrication. Nitrogen is effective in reducing the friction coefficient of materials that are in contact and subjected to a load and velocity. Originality/value – The experiments confirm that nitrogen is effective for reducing the friction coefficient of SCM 440 materials that are in contact with each other and subjected to a load and velocity

Item Type: Artikel Dosen
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TJ Mechanical engineering and machinery
T Technology > TL Motor vehicles. Aeronautics. Astronautics
T Technology > TS Manufactures
Divisi / Prodi: Faculty of Industrial Technology (Fakultas Teknologi Industri) > S1-Industrial Engineering (S1-Teknik Industri)
Depositing User: M.Sc Okka Adiyanto
Date Deposited: 03 Jul 2020 04:11
Last Modified: 03 Jul 2020 04:11
URI: http://eprints.uad.ac.id/id/eprint/19150

Actions (login required)

View Item View Item