In-Situ Catalytic Pyrolysis of Spirulina platensis residue (SPR): Effect of Temperature and Amount of C12-4 Catalyst on Product Yield

Jamilatun, Siti and Mahardhika, Ratih and Nurshinta, Imelda Eka and Shitophyta, Lukhi Mulia (2021) In-Situ Catalytic Pyrolysis of Spirulina platensis residue (SPR): Effect of Temperature and Amount of C12-4 Catalyst on Product Yield. Jurnal Rekayasa Proses, 15 (1). pp. 14-27. ISSN 2549-1490

Text 11. JURNAL REKAYASA PROSES.pdf Download (740kB)

Abstract

Currently, dependence on fossil energy, especially petroleum, is still high at 96% of the total consumption. One solution to overcome fossil energy consumption is processing alternative energy sources derived from microalgae biomass. This study aims to study the pyrolysis of microalgae with the addition of the C12-4 (Cr2O3+Fe2O3+C+CuO+promoter) catalyst. The biomass used in this study was Spirulina platensis residue (SPR). This study used a fixed bed reactor with an outer diameter of 44 mm, an inner diameter of 40 mm, and a total reactor height of 600 mm. The C12-4 was mixed fifty grams of SPR with a particle size of 100 mesh with a ratio variation of 5, 10, and 15 wt.%. The feed mixture was placed in the reactor (in-situ), and the reactor was tightly closed. The nickel-wire heater wrapped around the reactor wall was employed. The pyrolysis heating rate was 24.33 °C/min on average, and the temperatures were varied as 300, 400, 500, 550, and 600 °C. The research found that the optimum temperature conditions without and with the catalyst to produce bio-oil were different. The pyrolysis without any catalyst (500 0C), with a catalyst of 5 wt.% (500 0C), 10 wt.% (400 0C), and 15 wt.% (550 0C) produced the bio-oil yield of 15.00, 17.92, 16.78 and 16.54, respectively. The use of 5, 10, and 15 wt.% catalysts increased the water phase yield. The char yield was influenced by the amount of catalyst only at 300 0C; i.e., the more catalysts, the less char yield. The pyrolysis without any catalysts produced the highest gas product. A catalyst significantly increased the pyrolysis conversion from 48.69 (without catalyst) to 62.46% (15. wt.% catalyst) at a temperature of 300 0C. The optimum conditions for producing the best bio-oil were at 600 °C and 10 wt.% of catalysts, which resulted in an O/C ratio of 0.14.
Keywords: C12-4 catalyst, in-situ catalytic pyrolysis, Spirulina platensis residue, yield bio-oil

Item Type:	Artikel Umum
Subjects:	T Technology > TP Chemical technology
Divisi / Prodi:	Faculty of Industrial Technology (Fakultas Teknologi Industri) > S1-Chemical Engineering (S1-Teknik Kimia)
Depositing User:	Dr., MT Siti Jamilatun
Date Deposited:	20 Oct 2021 01:21
Last Modified:	20 Oct 2021 01:21
URI:	http://eprints.uad.ac.id/id/eprint/29086

Available Versions of this Item

• In-Situ Catalytic Pyrolysis of Spirulina platensis residue (SPR): Effect of Temperature and Amount of C12-4 Catalyst on Product Yield. (deposited 20 Oct 2021 00:51)

Actions (login required)

View Item