Peer Review_X-Ray machine control with wireless based on mA parameters

Yudhana, Anton (2021) Peer Review_X-Ray machine control with wireless based on mA parameters. IOP Publishing.

Text 25_X-Ray machine control with wireless based on mA parameters.pdf Download (1MB)

Abstract

. An x-ray machine is a medical device that is used as a diagnostic tool for patients. The
conventional x-ray machine consists of a control system, high voltage and tube x-ray machine.
The control system on conventional x-ray machines uses too many cables so it looks less
efficient. Control of the x-ray machine must be carried out in the same room as the equipment
so that it can endanger the radiographer when it will be operated, because the radiographer will
be continuously exposed to radiation. Therefore, an x-ray machine control system is designed
that is safe for radiographers when operated and efficient in the use of cables. This research
method uses the Arduino application to change the conventional control system to wireless, with
the aim of providing the radiographer's safety because he operates the device from a separate
room and does not face the x-ray machine directly. Current selection uses several contactors at
each different current. The contactor is controlled by a microcontroller connected by a series of
drivers. The process of selecting voltage, current and time is carried out on a Personal Computer
(PC) connected to the controller via Bluetooth. The test is done by measuring the output voltage
of the filament transformer using an AVO meter, then comparing it with the voltage calculation
results obtained from the x-ray machine tube specifications. Based on the tests that have been
done, it is found that the correction value is small and does not deviate much, which is 0.01 V
when selecting mA 50 and 0.09 V when selecting mA 60. The x-ray machine can be controlled
wirelessly using a PC with a distance 6 meters in conditions blocked by a 9 cm thick wall.

Item Type:	Other
Subjects:	T Technology > T Technology (General)
Divisi / Prodi:	Faculty of Industrial Technology (Fakultas Teknologi Industri) > S1-Electrical Engineering (S1-Teknik Elektro)
Depositing User:	Anton Yudhana,
Date Deposited:	15 Jul 2022 02:16
Last Modified:	18 Jul 2022 05:25
URI:	http://eprints.uad.ac.id/id/eprint/35872

Actions (login required)

View Item