Sabila, Liya Yusrina and Damayanti, Denti Agustina and Prakoso, Teguh (2022) BANDWIDTH IMPROVEMENT ON RECTANGULAR MONOPOLE ANTENNA USING DUAL BEVEL TECHNIQUE FOR ULTRAWIDEBAND TECHNOLOGY. [Artikel Dosen]
Text
5496-Article Text-20767-1-10-20220413.pdf Download (727kB) |
|
Text
Plagiarism Check_Liya.pdf Download (1MB) |
|
Text
Peer Review Gabungan.pdf Download (1MB) |
Abstract
This paper presents the analyzed Monopole Antenna for Ultrawideband with a rectangular patch design
using bevel technique at a frequency of 3.1 – 10.6 GHz. The fabricated antennas with dual bevel angles
have a very compact width and length of 40 mm x 33 mm respectively and a groundplane width of 13 mm.
To get bandwidth improvement on monopole antennas can be applied to the bevel angle on the patch. So,
to get the best antenna design, 3 optimizations of antenna size changes were carried out during the
simulation, that is optimization of patch length, patch width and bevel angle. Variation of patch length and
width is used to change the frequency range and variation of bevel angle to increase bandwidth. From each
change, the best result is taken. The experiment obtained the best simulation result of antenna and then
fabricate it. From the measurement results on the fabricated antenna, the lowest S11 value is -24.6 dB,
gain 2.6 dBi at a frequency of 5 GHz and radiation pattern is omnidirectional. The optimization process
using the bevel technique has been proven to be successful in shifting the frequency range by around 600
MHz and increasing the bandwidth by about 4% or 30 MHz.
Item Type: | Artikel Dosen |
---|---|
Subjects: | T Technology > TK Electrical engineering. Electronics Nuclear engineering |
Divisi / Prodi: | Faculty of Industrial Technology (Fakultas Teknologi Industri) > S1-Electrical Engineering (S1-Teknik Elektro) |
Depositing User: | S.T., M.T. Liya Yusrina Sabila |
Date Deposited: | 18 Aug 2022 02:50 |
Last Modified: | 18 Aug 2022 02:50 |
URI: | http://eprints.uad.ac.id/id/eprint/36139 |
Actions (login required)
View Item |