[similarity Check] Tribological Characteristics of SCM 440 Bearing Steel Under Gas and Oil Lubricant in The Cylinder Block Tractor Engine

Adiyanto, Okka and Pratama, Pandu Sandi and Choi, Wonsik [similarity Check] Tribological Characteristics of SCM 440 Bearing Steel Under Gas and Oil Lubricant in The Cylinder Block Tractor Engine. Emerald.

Text Tribological_characteristics_of_SCM_440_bearing_st.pdf - Published Version Download (2MB)

Abstract

Purpose – This paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a
tractor engine with gas lubrication and oil lubrication.
Design/methodology/approach – Friction tests were performed using a pin-on-disc tester with loads of 2 to 10 N and sliding velocities of 0.06 to
0.34 m/s. The experiment was done with and without nitrogen, and paraffin oil lubricant was used to prevent wear during process.
Findings – The nondimensional characteristic number from the Stribeck curves indicated that the lubrication regime is hydrodynamic. As the
velocity and load increased, the friction coefficient of the SCM 440 increased and greater applied load resulted in a smaller friction coefficient. The
range of the friction coefficient was 0.017001 to 0.092904 with paraffin oil lubrication and 0.01614 to 0.4555 with nitrogen lubrication. Nitrogen is
effective in reducing the friction coefficient of materials that are in contact and subjected to a load and velocity.
Originality/value – The experiments confirm that nitrogen is effective for reducing the friction coefficient of SCM 440 materials that are in contact
with each other and subjected to a load and velocity.

Item Type:	Other
Keyword:	Tribology, Wear, Friction, Nitrogen, Paraffin, SCM 440
Subjects:	T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery T Technology > TS Manufactures
Divisi / Prodi:	Faculty of Industrial Technology (Fakultas Teknologi Industri) > S1-Industrial Engineering (S1-Teknik Industri)
Depositing User:	Ph.D Okka Adiyanto
Date Deposited:	24 Aug 2024 02:42
Last Modified:	24 Aug 2024 02:42
URI:	http://eprints.uad.ac.id/id/eprint/68689

Actions (login required)

View Item